How to Use the Fuck-O-Matic Pro XL Stroker

Quick Answer

To use the Fuck-O-Matic Pro XL stroker, start by applying lube, then power on and adjust the suction and vibration settings to your preference. Follow the steps below for a safe and satisfying hands-free experience.

Step-by-Step Guide

1. Prepare the Device and Yourself: Remove the stroker from its packaging and charge it fully if needed. Find a comfortable position, apply a generous amount of water-based lubricant to yourself and the sleeve opening. Skipping lube can cause chafing and reduce the stroker's effectiveness.
2. Power On and Adjust Settings: Press and hold the power button to turn on the device. Cycle through the suction and vibration modes to find a level that feels good. Start low and increase gradually. Don't jump to the highest setting immediately—you can always turn it up later.
3. Insert and Let the Machine Work: Guide yourself into the sleeve until it feels snug. The automatic stroking and suction will take over. Use your hands to adjust the angle or pressure if desired, but the device is designed for hands-free use. If you feel any pinching or discomfort, stop and reapply lube or reduce the suction level.
4. Clean After Each Use: After finishing, turn off the device and remove the sleeve (if detachable). Wash the sleeve with warm water and mild soap or toy cleaner. Dry thoroughly before storing. Leaving the sleeve wet can lead to mold or material degradation over time.

Product Facts

• Fuck-O-Matic Pro XL: The PDX ELITE® FUCK-O-Matic PRO™ XL elevates masturbation with powerful suction-action for the ultimate MEGA-STROKER experience. The strong suction means you should start on a lower setting and add enough lube to avoid friction irritation.