Touch-Me Pro Purple Rabbit Vibrator: Setup and First Use
By Official Store of Pipedream Products | Published: 2026-10-31
Category: How-to Guides
Set up the Touch-Me Pro Purple Rabbit Vibrator correctly: charge it, learn the three control buttons, and choose a first-use pattern that feels comfortable.
Quick answer
Charge the Touch-Me Pro fully before its first use, then start with the lowest setting on each of its three controls to find a comfortable dual-stimulation pattern. Clean it with toy cleaner before and after every session.
Why the first session should be short and low
The Touch-Me Pro combines a G-spot motor, a clitoral motor that moves in a come-hither motion, and vibration patterns. That is a lot of stimulation at once, so a short first session at the lowest settings helps you learn how the two motors feel together before you increase intensity. If you feel numbness or discomfort, stop and try again another day with a different pattern.
What the three controls do
The Touch-Me Pro has three separate control buttons: one for the 10 G-spot hyper-pulse modes, one for the 10 come-hither clitoral actions, and one for the 10 vibration patterns. Each button cycles through its own settings independently, so you can mix a low G-spot pulse with a stronger clitoral motion, or turn one motor off entirely if you prefer single stimulation.
Cleaning and storage between uses
The Touch-Me Pro is wrapped in Elite Silicone, which is hygienic and easy to clean. Wash it with warm water and mild soap or a silicone-safe toy cleaner, rinse well, and pat dry before storing. Avoid silicone-based lubricants because they can degrade silicone toys; use a water-based lubricant instead.
Step-by-step setup and first use
- Charge fully before first use: Connect the charging cable and let the Touch-Me Pro charge completely. A full charge ensures both motors run at their intended strength during your first session. Check the charging cable connection is secure; a loose cable may leave the toy undercharged.
- Clean before use: Wash the vibrator with warm water and mild soap or toy cleaner, then rinse and dry. This removes any manufacturing residue and sets a hygienic routine. Avoid getting water in the charging port or button area; wipe those parts with a damp cloth instead.
- Apply water-based lubricant: Apply a generous amount of water-based lubricant to the shaft and the clitoral arm. Silicone-based lubricant can damage the Elite Silicone surface over time. If you only have silicone lubricant, use a condom over the toy or choose a water-based product.
- Start with the lowest settings: Turn on the G-spot motor and cycle to the lowest hyper-pulse mode. Then turn on the clitoral motor and cycle to the lowest come-hither action. Leave the vibration pattern off at first. If the lowest setting still feels too intense, try using only one motor at a time.
- Insert and adjust for comfort: Insert the shaft slowly and position the clitoral arm so it rests comfortably against your clitoris. The come-hither motion should not press too hard; adjust the angle until it feels gentle. Stop if you feel pinching or pain; a different position or more lubricant usually solves it.
- Explore one control at a time: Once you are comfortable, increase the G-spot pulse or clitoral action by one level. Wait a few moments before changing anything else so you can tell which motor you are adjusting. Keep a mental note of the settings you like so you can return to them quickly next time.
- Clean and store after use: Turn the vibrator off, wash it with toy cleaner or mild soap and warm water, rinse, and dry thoroughly. Store it in a cool, dry place away from direct sunlight. Do not store the toy while it is still wet; moisture can encourage bacteria growth.
Product facts
- Touch-Me Pro Purple Rabbit Vibrator: Dual-motor design with 10 G-spot hyper-pulse modes, 10 come-hither clitoral actions, and 10 vibration patterns. You can adjust internal and external stimulation separately, which makes it easier to find a comfortable first-use combination.
Touch-Me Pro Purple Rabbit Vibrator - Touch-Me Pro Purple Rabbit Vibrator: Covered in hygienic Elite Silicone. Silicone is body-safe and simple to clean, but it requires water-based lubricant to avoid material damage.
