Wet Bussies Super Bangin' Butthole: Anal Stroker Care
By Official Store of Pipedream Products | Published: 2026-11-05
Category: Tips en onderhoud
Keep your self-lubricating Wet Bussies anal stroker fresh with a simple cleaning, drying, and storage routine that protects the TPE and preserves the slippery feel.
Quick answer
Rinse the Wet Bussies Super Bangin' Butthole with warm water immediately after each use, clean it gently with a mild soap, dry it completely inside and out, and store it in a cool, dry place away from direct sunlight. Because the sleeve is self-lubricating, never use silicone-based lubricants or harsh cleaners that can break down the TPE.
Why self-lubricating TPE needs a different cleaning approach
The Wet Bussies Super Bangin' Butthole is made from a self-lubricating TPE blend that activates with water. That means you should skip alcohol, bleach, and oil-based soaps, which can strip the material and reduce the slippery effect. Stick to warm water and a small amount of mild, fragrance-free soap.
TPE is porous, so it absorbs moisture and oils if left damp. Drying thoroughly is just as important as cleaning—any trapped water can encourage bacteria or degrade the sleeve over time.
When to clean and when to replace
Clean the stroker after every use, even if you only used it briefly. If you notice a persistent odor, sticky residue, or visible tears, it is time to replace it. Do not try to patch small tears with household glue; those products are not skin-safe and can ruin the sleeve.
Step-by-step care routine
- Rinse immediately after use: Flush warm water through the sleeve to remove residue. Do not use hot water—it can warp the TPE. Check the water temperature with your wrist before rinsing.
- Wash with mild soap: Apply a small amount of fragrance-free, mild soap to your fingers and gently work it into the inner channel. Avoid scrubbing with abrasive cloths. Rinse until the water runs clear and no soap film remains.
- Dry completely: Shake out excess water, then pat the outside dry with a clean, lint-free towel. Leave the sleeve in a well-ventilated area to air-dry the inside completely before storing. Never store the stroker while it is still damp.
- Store properly: Place the dry stroker in a cool, dark place away from direct sunlight and heat. Keep it separate from other TPE toys to prevent sticking. Avoid airtight containers; choose a breathable storage bag or box.
- Refresh with water before next use: Splash a little water inside the sleeve to reactivate the self-lubricating surface. If it still feels dry, add a few drops of water—not lubricant. Do not use silicone or oil-based lubricants, which can damage the TPE.
Product facts
- Wet Bussies - Super Bangin' Butthole: Self-lubricating—add a little water to activate the slippery feel. You do not need to apply separate lubricant, but water is required to keep the sleeve slick and avoid friction.
Wet Bussies - Super Bangin' Butthole
